In this episode, inspired by The Skid Factory, I make some engine mounts from a 1987 Mitsubishi L200 Rear Spring Front Eye Bushes.
Yearly Archives: 2020
Braking & Cooling
In this episode, I finally finish off the clutch & brake systems, and take another look at how I’m going to be keeping everything cool.
Will it start (again?)
In episodes 20 and 21, I look at what I’ve broken with the wiring, and try to get the car started!
Tackling the wiring
In episodes 18 and 19, I begin to tackle the wiring!
Things are heating up (again)
This time round, I tackle the heater, and it gets a massive upgrade from what I had before!
Fuel tank relocation & plumbing
Next up is moving the fuel tank, and replumbing it entirely!
Brake plumbing & switches
In episode 13, I fabricate some brackets to hold the brake & clutch switches, and do some copper pipework.
Wilwood Pedalbox Installation
In episode 12 of Garry’s Garage, I get my Wilwood pedals installed and mounted nice and securely.
I apologise for the poor audio quality in parts of the video.
Down the rabbit hole
Episode 11 of Garry’s Garage is live! I didn’t realise at the time that this was the start of quite a large rabbit hole I have led myself down!
Into double digits
Episode 10 is now live!